1Set Electric Dog Fence System Pet Tone Shock Boundary Containment Water Resistant Collar Receiver For Small Medium Large Dog

Features

• Safe, efficient dog fencing system — Comes with buried wire and a wall-mounted transmitter to help train dogs to keep to their own space, keeping your furniture and daily necessities clean and tidy without the need for a physical fence. Your dog stays in the specified safe area, so you don't have to worry when you go out. It can be widely used for dog training at home or on field trips.
• Automatic dog training — The collar works automatically once you install the system. It sends a beep and then a shock as your dog tries to cross the boundary wire. The closer your dog goes, the more intense the shock, effectively training him back to the play area you set.
• Adjustable control range — The electric fence allows you to control the width of the boundary by adjusting the knob. Customisable range up to 1.2 acres (53,189 square feet). The wire-break warning tells you in time if the wire is broken, and the red low-battery indicator prompts you to replace the collar battery to avoid intermittent operation.
• Multiple dogs supported — Fits all kinds of dogs weighing 4 lbs and up, with neck sizes from 7.5 in to 17.92 in. One transmitter can pair with up to 3 collar receivers. Note: the package contains two receiver collars.
• Stable mount — This do-it-yourself weekend project lets you create an in-ground fence designed to fit your yard. Use it only under the owner's supervision, and do not leave the collar receiver on your pet for more than 12 hours a day.

Friendly reminder

Please use short probes for short-haired dogs and long probes for long-haired dogs. The fence activates only when a dog approaches at a relatively low speed within 0.5m (1.64ft) of the boundary; otherwise the fence will not trigger.

How it works

1) Wall-mounted transmitter: the transmitter is the central controller of the whole electronic system. Make sure the wire is set in a loop.
2) Receiver collar: the receiver will give a warning beep first, then continuous stimulation if your dog attempts to approach the wire boundary.
3) How to install the system:
Design your containment area and calculate the amount of wire needed.
Install the wall transmitter.
Lay out the perimeter wire.
Connect the perimeter wire to the wall transmitter.
Verify the transmitter is functioning without problems.
Set up the receiver, then test the containment system and adjust the field width.
Install the boundary wire and training flags.
Fit collars to your dogs and train your dogs.

Note

Only use it for dogs, not any other animals.
Let your dog adapt to the collar before you start training; allow your dog to accept the collar as a part of everyday life.
Do not set the program while the collar is on your dog.
Keep out of reach of children.
Please read all instructions before using this product.
The receiver can detect the signal around 1m from the boundary when the boundary range is adjusted to minimum, and around 2m when adjusted to maximum. If your dog is small, a smaller field width is recommended; if your dog is large, a bigger field width is recommended.

Specifications

Package list

Actual Product Photo